Commit 8874f94d authored by Morten Welinder's avatar Morten Welinder

1.11.0

parent 945dc002
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-24 Jean Brefort <jean.brefort@normalesup.org>
* src/item-edit.c (item_edit_draw): preserve cairo state. [#664692]
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-17 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* analysis-statistical.xml: standardize "not yet written"
......
......@@ -1242,7 +1242,7 @@ If @{places} is given and @{x} is negative, @{places} is ignored.
@SHORTDESC=hexadecimal representation of numeric value
@SYNTAX=HEXREP(x)
@ARGUMENTDESCRIPTION=@{x}: number
@DESCRIPTION=HEXREP returns a hexadecimal string representation of @x.
@DESCRIPTION=HEXREP returns a hexadecimal string representation of @{x}.
@NOTE=This is a function meant for debugging. The layout of the result may change and even depend on how Gnumeric was compiled.
@CATEGORY=Engineering
......@@ -1388,14 +1388,6 @@ The depreciation coefficient used is:
@NOTE=Named for AMORtissement LINeaire Comptabilite. If @{basis} is 0, then the US 30/360 method is used. If @{basis} is 1, then actual number of days is used. If @{basis} is 2, then actual number of days is used within a month, but years are considered only 360 days. If @{basis} is 3, then actual number of days is used within a month, but years are always considered 365 days. If @{basis} is 4, then the European 30/360 method is used.
@SEEALSO=AMORDEGRC
@CATEGORY=Finance
@FUNCTION=ATL_LAST
@SHORTDESC=sample real-time data source
@SYNTAX=ATL_LAST(tag)
@ARGUMENTDESCRIPTION=@{tag}: tag to watch
@DESCRIPTION=ATL_LAST is a sample implementation of a real time data source. It takes a string tag and monitors the named pipe ~/atl for changes to the value of that tag.
@NOTE=This is not intended to be generally enabled and is OFF by default.
@CATEGORY=Finance
@FUNCTION=COUPDAYBS
@SHORTDESC=number of days from coupon period to settlement
......@@ -6143,70 +6135,3 @@ The distinction between half-width and full-width characters is described in htt
@EXCEL=This function is Excel compatible.
@SEEALSO=DOLLAR,FIXED,TEXT
@CATEGORY=Time Series Analysis
@FUNCTION=FOURIER
@SHORTDESC=Fourier or inverse Fourier transform
@SYNTAX=FOURIER(Sequence,Inverse,Separate)
@ARGUMENTDESCRIPTION=@{Sequence}: the data sequence to be transformed
@{Inverse}: if true, the inverse Fourier transform is calculated, defaults to false
@{Separate}: if true, the real and imaginary parts are given separately, defaults to false
@DESCRIPTION=This array function returns the Fourier or inverse Fourier transform of the given data sequence.
The output consists of one column of complex numbers if @{Separate} is false and of two columns of real numbers if @{Separate} is true.
If @{Separate} is true the first output column contains the real parts and the second column the imaginary parts.
@NOTE=If @{Sequence} is neither an n by 1 nor 1 by n array, this function returns #VALUE!
@CATEGORY=Time Series Analysis
@FUNCTION=HPFILTER
@SHORTDESC=Hodrick Prescott Filter
@SYNTAX=HPFILTER(Sequence,λ)
@ARGUMENTDESCRIPTION=@{Sequence}: the data sequence to be transformed
@{λ}: filter parameter λ, defaults to 1600
@DESCRIPTION=This array function returns the trend and cyclical components obtained by applying the Hodrick Prescott Filter with parameter @{λ} to the given data sequence.
The output consists of two columns of numbers, the first containing the trend component, the second the cyclical component.
@NOTE=If @{Sequence} is neither an n by 1 nor 1 by n array, this function returns #VALUE! If @{Sequence} contians less than 6 numerical values, this function returns #VALUE!
@CATEGORY=Time Series Analysis
@FUNCTION=INTERPOLATION
@SHORTDESC=interpolated values corresponding to the given abscissa targets
@SYNTAX=INTERPOLATION(abscissae,ordinates,targets,interpolation)
@ARGUMENTDESCRIPTION=@{abscissae}: ordered abscissae of the given data points
@{ordinates}: ordinates of the given data points
@{targets}: abscissae of the interpolated data
@{interpolation}: method of interpolation, defaults to 0 ('linear')
@DESCRIPTION=The output consists always of one column of numbers.
Possible interpolation methods are:
0: linear;
1: linear with averaging;
2: staircase;
3: staircase with averaging;
4: natural cubic spline;
5: natural cubic spline with averaging.
@NOTE=The @{abscissae} must be given in increasing order. If any of interpolation methods 1 ('linear with averaging'), 3 ('staircase with averaging'), and 5 ('natural cubic spline with averaging') is used, the number of returned values is one less than the number of targets and the targets values must be given in increasing order. Strings and empty cells in @{abscissae} and @{ordinates} are ignored. If several target data are provided they must be in the same column in consecutive cells.
@SEEALSO=PERIODOGRAM
@CATEGORY=Time Series Analysis
@FUNCTION=PERIODOGRAM
@SHORTDESC=periodogram of the given data
@SYNTAX=PERIODOGRAM(ordinates,filter,abscissae,interpolation,number)
@ARGUMENTDESCRIPTION=@{ordinates}: ordinates of the given data
@{filter}: windowing function to be used, defaults to no filter
@{abscissae}: abscissae of the given data, defaults to regularly spaced abscissae
@{interpolation}: method of interpolation, defaults to none
@{number}: number of interpolated data points
@DESCRIPTION=If an interpolation method is used, the number of returned values is one less than the number of targets and the targets values must be given in increasing order.
The output consists always of one column of numbers.
Possible interpolation methods are:
0: linear;
1: linear with averaging;
2: staircase;
3: staircase with averaging;
4: natural cubic spline;
5: natural cubic spline with averaging.
Possible window functions are:
0: no filter (rectangular window)
1: Bartlett (triangular window)
2: Hahn (cosine window)
3: Welch (parabolic window)
@NOTE=Strings and empty cells in @{abscissae} and @{ordinates} are ignored. If several target data are provided they must be in the same column in consecutive cells.
@SEEALSO=INTERPOLATION
......@@ -4812,36 +4812,6 @@
</para>
</refsect1>
</refentry>
<refentry id="gnumeric-function-ATL_LAST">
<refmeta>
<refentrytitle>
<function>ATL_LAST</function>
</refentrytitle>
</refmeta>
<refnamediv>
<refname>
<function>ATL_LAST</function>
</refname>
<refpurpose>
sample real-time data source
</refpurpose>
</refnamediv>
<refsynopsisdiv>
<synopsis><function>ATL_LAST</function>(<parameter>tag</parameter>)</synopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<para><parameter>tag</parameter>: tag to watch</para>
</refsect1>
<refsect1>
<title>Description</title>
<para><function>ATL_LAST</function> is a sample implementation of a real time data source. It takes a string tag and monitors the named pipe ~/atl for changes to the value of that tag.</para>
</refsect1>
<refsect1>
<title>Note</title>
<para>This is not intended to be generally enabled and is OFF by default.</para>
</refsect1>
</refentry>
<refentry id="gnumeric-function-COUPDAYBS">
<refmeta>
<refentrytitle>
......@@ -21174,170 +21144,4 @@
</refsect1>
</refentry>
</sect1>
<sect1 id="CATEGORY_Time_Series_Analysis">
<title>Time Series Analysis</title>
<refentry id="gnumeric-function-FOURIER">
<refmeta>
<refentrytitle>
<function>FOURIER</function>
</refentrytitle>
</refmeta>
<refnamediv>
<refname>
<function>FOURIER</function>
</refname>
<refpurpose>
Fourier or inverse Fourier transform
</refpurpose>
</refnamediv>
<refsynopsisdiv>
<synopsis><function>FOURIER</function>(<parameter>Sequence</parameter>,<parameter>Inverse</parameter>,<parameter>Separate</parameter>)</synopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<para><parameter>Sequence</parameter>: the data sequence to be transformed</para>
<para><parameter>Inverse</parameter>: if true, the inverse Fourier transform is calculated, defaults to false</para>
<para><parameter>Separate</parameter>: if true, the real and imaginary parts are given separately, defaults to false</para>
</refsect1>
<refsect1>
<title>Description</title>
<para>This array function returns the Fourier or inverse Fourier transform of the given data sequence.</para>
<para>The output consists of one column of complex numbers if <parameter>Separate</parameter> is false and of two columns of real numbers if <parameter>Separate</parameter> is true.</para>
<para>If <parameter>Separate</parameter> is true the first output column contains the real parts and the second column the imaginary parts.</para>
</refsect1>
<refsect1>
<title>Note</title>
<para>If <parameter>Sequence</parameter> is neither an n by 1 nor 1 by n array, this function returns #VALUE!</para>
</refsect1>
</refentry>
<refentry id="gnumeric-function-HPFILTER">
<refmeta>
<refentrytitle>
<function>HPFILTER</function>
</refentrytitle>
</refmeta>
<refnamediv>
<refname>
<function>HPFILTER</function>
</refname>
<refpurpose>
Hodrick Prescott Filter
</refpurpose>
</refnamediv>
<refsynopsisdiv>
<synopsis><function>HPFILTER</function>(<parameter>Sequence</parameter>,<parameter/>λ)</synopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<para><parameter>Sequence</parameter>: the data sequence to be transformed</para>
<para><parameter>λ</parameter>: filter parameter λ, defaults to 1600</para>
</refsect1>
<refsect1>
<title>Description</title>
<para>This array function returns the trend and cyclical components obtained by applying the Hodrick Prescott Filter with parameter <parameter>λ</parameter> to the given data sequence.</para>
<para>The output consists of two columns of numbers, the first containing the trend component, the second the cyclical component.</para>
</refsect1>
<refsect1>
<title>Note</title>
<para>If <parameter>Sequence</parameter> is neither an n by 1 nor 1 by n array, this function returns #VALUE! If <parameter>Sequence</parameter> contians less than 6 numerical values, this function returns #VALUE!</para>
</refsect1>
</refentry>
<refentry id="gnumeric-function-INTERPOLATION">
<refmeta>
<refentrytitle>
<function>INTERPOLATION</function>
</refentrytitle>
</refmeta>
<refnamediv>
<refname>
<function>INTERPOLATION</function>
</refname>
<refpurpose>
interpolated values corresponding to the given abscissa targets
</refpurpose>
</refnamediv>
<refsynopsisdiv>
<synopsis><function>INTERPOLATION</function>(<parameter>abscissae</parameter>,<parameter>ordinates</parameter>,<parameter>targets</parameter>,<parameter>interpolation</parameter>)</synopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<para><parameter>abscissae</parameter>: ordered abscissae of the given data points</para>
<para><parameter>ordinates</parameter>: ordinates of the given data points</para>
<para><parameter>targets</parameter>: abscissae of the interpolated data</para>
<para><parameter>interpolation</parameter>: method of interpolation, defaults to 0 ('linear')</para>
</refsect1>
<refsect1>
<title>Description</title>
<para>The output consists always of one column of numbers.</para>
<para>Possible interpolation methods are:</para>
<para>0: linear;</para>
<para>1: linear with averaging;</para>
<para>2: staircase;</para>
<para>3: staircase with averaging;</para>
<para>4: natural cubic spline;</para>
<para>5: natural cubic spline with averaging.</para>
</refsect1>
<refsect1>
<title>Note</title>
<para>The <parameter>abscissae</parameter> must be given in increasing order. If any of interpolation methods 1 ('linear with averaging'), 3 ('staircase with averaging'), and 5 ('natural cubic spline with averaging') is used, the number of returned values is one less than the number of targets and the targets values must be given in increasing order. Strings and empty cells in <parameter>abscissae</parameter> and <parameter>ordinates</parameter> are ignored. If several target data are provided they must be in the same column in consecutive cells.</para>
</refsect1>
<refsect1>
<title>See also</title>
<para><link linkend="gnumeric-function-PERIODOGRAM"><function>PERIODOGRAM</function></link>.
</para>
</refsect1>
</refentry>
<refentry id="gnumeric-function-PERIODOGRAM">
<refmeta>
<refentrytitle>
<function>PERIODOGRAM</function>
</refentrytitle>
</refmeta>
<refnamediv>
<refname>
<function>PERIODOGRAM</function>
</refname>
<refpurpose>
periodogram of the given data
</refpurpose>
</refnamediv>
<refsynopsisdiv>
<synopsis><function>PERIODOGRAM</function>(<parameter>ordinates</parameter>,<parameter>filter</parameter>,<parameter>abscissae</parameter>,<parameter>interpolation</parameter>,<parameter>number</parameter>)</synopsis>
</refsynopsisdiv>
<refsect1>
<title>Arguments</title>
<para><parameter>ordinates</parameter>: ordinates of the given data</para>
<para><parameter>filter</parameter>: windowing function to be used, defaults to no filter</para>
<para><parameter>abscissae</parameter>: abscissae of the given data, defaults to regularly spaced abscissae</para>
<para><parameter>interpolation</parameter>: method of interpolation, defaults to none</para>
<para><parameter>number</parameter>: number of interpolated data points</para>
</refsect1>
<refsect1>
<title>Description</title>
<para>If an interpolation method is used, the number of returned values is one less than the number of targets and the targets values must be given in increasing order.</para>
<para>The output consists always of one column of numbers.</para>
<para>Possible interpolation methods are:</para>
<para>0: linear;</para>
<para>1: linear with averaging;</para>
<para>2: staircase;</para>
<para>3: staircase with averaging;</para>
<para>4: natural cubic spline;</para>
<para>5: natural cubic spline with averaging.</para>
<para>Possible window functions are:</para>
<para>0: no filter (rectangular window)</para>
<para>1: Bartlett (triangular window)</para>
<para>2: Hahn (cosine window)</para>
<para>3: Welch (parabolic window)</para>
</refsect1>
<refsect1>
<title>Note</title>
<para>Strings and empty cells in <parameter>abscissae</parameter> and <parameter>ordinates</parameter> are ignored. If several target data are provided they must be in the same column in consecutive cells.</para>
</refsect1>
<refsect1>
<title>See also</title>
<para><link linkend="gnumeric-function-INTERPOLATION"><function>INTERPOLATION</function></link>.
</para>
</refsect1>
</refentry>
</sect1>
</appendix>
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-09-04 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* developer/odf-foreign.txt: update
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-21 Morten Welinder <terra@gnome.org>
* xlsx-read.c (start_update_progress): Handle NULL xin.
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-19 Morten Welinder <terra@gnome.org>
* functions.c (help_hexrep): Fix argument reference.
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-17 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* functions.c (help_pi): use mathematical pi rather than greek pi
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-19 Morten Welinder <terra@gnome.org>
* functions.c (hpfilter): Fix prototype to match function
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-10-27 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* html.c (cb_html_attrs_as_string): write sub- and superscript
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-11-18 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* openoffice-read.c (od_style_prop_chart): correct the interpolation
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-07-31 Morten Welinder <terra@gnome.org>
* Release 1.10.17
......
2011-11-24 Morten Welinder <terra@gnome.org>
* Release 1.11.0
2011-08-01 Andreas J. Guelzow <aguelzow@pyrshep.ca>
* plugin.xml.in: add mime-type
......