Commit 7282810d authored by Sven Neumann's avatar Sven Neumann Committed by Sven Neumann

glib/gconvert.c glib/gspawn-win32.c some minor documentation fixes.

2001-10-01  Sven Neumann  <sven@gimp.org>

	* glib/gconvert.c
	* glib/gspawn-win32.c
	* glib/gspawn.c: some minor documentation fixes.
parent abf9f5f8
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
2001-10-01 Sven Neumann <sven@gimp.org>
* glib/gconvert.c
* glib/gspawn-win32.c
* glib/gspawn.c: some minor documentation fixes.
2001-09-29 Alexander Larsson <alla@lysator.liu.se>
* configure.in:
......
......@@ -219,22 +219,22 @@ open_converter (const gchar *to_codeset,
* @from_codeset: character set of @str.
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* Even if the conversion was successful, this may be
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Convert a string from one character set to another.
*
* Return value: If the conversion was successful, a newly allocated
* NUL-terminated string, which must be freed with
* g_free. Otherwise %NULL and @error will be set.
* nul-terminated string, which must be freed with
* g_free(). Otherwise %NULL and @error will be set.
**/
gchar*
g_convert (const gchar *str,
......@@ -282,21 +282,21 @@ g_convert (const gchar *str,
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Convert a string from one character set to another.
*
* Return value: If the conversion was successful, a newly allocated
* NUL-terminated string, which must be freed with
* g_free. Otherwise %NULL and @error will be set.
* nul-terminated string, which must be freed with
* g_free(). Otherwise %NULL and @error will be set.
**/
gchar*
g_convert_with_iconv (const gchar *str,
......@@ -408,10 +408,10 @@ g_convert_with_iconv (const gchar *str,
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
......@@ -424,8 +424,8 @@ g_convert_with_iconv (const gchar *str,
* will simply return that approximate conversion.
*
* Return value: If the conversion was successful, a newly allocated
* NUL-terminated string, which must be freed with
* g_free. Otherwise %NULL and @error will be set.
* nul-terminated string, which must be freed with
* g_free(). Otherwise %NULL and @error will be set.
**/
gchar*
g_convert_with_fallback (const gchar *str,
......@@ -662,18 +662,18 @@ strdup_len (const gchar *string,
* g_locale_to_utf8:
* @opsysstring: a string in the encoding of the current locale
* @len: the length of the string, or -1 if the string is
* NULL-terminated.
* nul-terminated.
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @error: location to store the error occuring, or %NULL to ignore
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Converts a string which is in the encoding used for strings by
......@@ -802,18 +802,18 @@ g_locale_to_utf8 (const gchar *opsysstring,
* g_locale_from_utf8:
* @utf8string: a UTF-8 encoded string
* @len: the length of the string, or -1 if the string is
* NULL-terminated.
* nul-terminated.
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @error: location to store the error occuring, or %NULL to ignore
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Converts a string from UTF-8 to the encoding used for strings by
......@@ -948,18 +948,18 @@ g_locale_from_utf8 (const gchar *utf8string,
* g_filename_to_utf8:
* @opsysstring: a string in the encoding for filenames
* @len: the length of the string, or -1 if the string is
* NULL-terminated.
* nul-terminated.
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @error: location to store the error occuring, or %NULL to ignore
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Converts a string which is in the encoding used for filenames
......@@ -991,20 +991,20 @@ g_filename_to_utf8 (const gchar *opsysstring,
/**
* g_filename_from_utf8:
* @utf8string: a UTF-8 encoded string
* @utf8string: a UTF-8 encoded string.
* @len: the length of the string, or -1 if the string is
* NULL-terminated.
* nul-terminated.
* @bytes_read: location to store the number of bytes in the
* input string that were successfully converted, or %NULL.
* Even if the conversion was succesful, this may be
* less than len if there were partial characters
* less than @len if there were partial characters
* at the end of the input. If the error
* G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte fofset after the last valid
* #G_CONVERT_ERROR_ILLEGAL_SEQUENCE occurs, the value
* stored will the byte offset after the last valid
* input sequence.
* @bytes_written: the stored in the output buffer (not including the
* terminating nul.
* @error: location to store the error occuring, or %NULL to ignore
* @bytes_written: the number of bytes stored in the output buffer (not
* including the terminating NULL).
* @error: location to store the error occuring, or %NULL to ignore
* errors. Any of the errors in #GConvertError may occur.
*
* Converts a string from UTF-8 to the encoding used for filenames.
......@@ -1227,7 +1227,7 @@ g_unescape_uri_string (const gchar *escaped,
/**
* g_filename_from_uri:
* @uri: a uri describing a filename (escaped, encoded in UTF-8)
* @uri: a uri describing a filename (escaped, encoded in UTF-8).
* @hostname: Location to store hostname for the URI, or %NULL.
* If there is no hostname in the URI, %NULL will be
* stored in this location.
......
......@@ -468,13 +468,13 @@ g_spawn_sync (const gchar *working_directory,
* Executes a child program asynchronously (your program will not
* block waiting for the child to exit). The child program is
* specified by the only argument that must be provided, @argv. @argv
* should be a NULL-terminated array of strings, to be passed as the
* should be a %NULL-terminated array of strings, to be passed as the
* argument vector for the child. The first string in @argv is of
* course the name of the program to execute. By default, the name of
* the program must be a full path; the PATH shell variable will only
* be searched if you pass the %G_SPAWN_SEARCH_PATH flag.
*
* @envp is a NULL-terminated array of strings, where each string
* @envp is a %NULL-terminated array of strings, where each string
* has the form <literal>KEY=VALUE</literal>. This will become
* the child's environment. If @envp is NULL, the child inherits its
* parent's environment.
......
......@@ -417,13 +417,13 @@ g_spawn_sync (const gchar *working_directory,
* Executes a child program asynchronously (your program will not
* block waiting for the child to exit). The child program is
* specified by the only argument that must be provided, @argv. @argv
* should be a NULL-terminated array of strings, to be passed as the
* should be a %NULL-terminated array of strings, to be passed as the
* argument vector for the child. The first string in @argv is of
* course the name of the program to execute. By default, the name of
* the program must be a full path; the PATH shell variable will only
* be searched if you pass the %G_SPAWN_SEARCH_PATH flag.
*
* @envp is a NULL-terminated array of strings, where each string
* @envp is a %NULL-terminated array of strings, where each string
* has the form <literal>KEY=VALUE</literal>. This will become
* the child's environment. If @envp is NULL, the child inherits its
* parent's environment.
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment