Commit 1303b872 authored by Sven Neumann's avatar Sven Neumann Committed by Sven Neumann

tools/pdbgen/pdb/color.pdb tools/pdbgen/pdb/drawable.pdb

2006-09-13  Sven Neumann  <sven@gimp.org>

	* tools/pdbgen/pdb/color.pdb
	* tools/pdbgen/pdb/drawable.pdb
	* tools/pdbgen/pdb/image.pdb
	* tools/pdbgen/pdb/layer.pdb
	* tools/pdbgen/pdb/paint_tools.pdb
	* tools/pdbgen/pdb/selection_tools.pdb: use the canonical form
when
	refering to parameters in the procedure description.
parent d607b7da
2006-09-13 Sven Neumann <sven@gimp.org>
* tools/pdbgen/pdb/color.pdb
* tools/pdbgen/pdb/drawable.pdb
* tools/pdbgen/pdb/image.pdb
* tools/pdbgen/pdb/layer.pdb
* tools/pdbgen/pdb/paint_tools.pdb
* tools/pdbgen/pdb/selection_tools.pdb: use the canonical form when
refering to parameters in the procedure description.
2006-09-13 Michael Natterer <mitch@gimp.org>
* app/paint/gimpsmudge.c: cosmetic cleanups, renamed
......
......@@ -1190,7 +1190,7 @@ register_color_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-color-balance",
"Modify the color balance of the specified drawable.",
"Modify the color balance of the specified drawable. There are three axis which can be modified: cyan-red, magenta-green, and yellow-blue. Negative values increase the amount of the former, positive values increase the amount of the latter. Color balance can be controlled with the 'transfer_mode' setting, which allows shadows, midtones, and highlights in an image to be affected differently. The 'preserve_lum' parameter, if TRUE, ensures that the luminosity of each pixel remains fixed.",
"Modify the color balance of the specified drawable. There are three axis which can be modified: cyan-red, magenta-green, and yellow-blue. Negative values increase the amount of the former, positive values increase the amount of the latter. Color balance can be controlled with the 'transfer_mode' setting, which allows shadows, midtones, and highlights in an image to be affected differently. The 'preserve-lum' parameter, if TRUE, ensures that the luminosity of each pixel remains fixed.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1997",
......@@ -1360,7 +1360,7 @@ register_color_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-hue-saturation",
"Modify hue, lightness, and saturation in the specified drawable.",
"This procedures allows the hue, lightness, and saturation in the specified drawable to be modified. The 'hue_range' parameter provides the capability to limit range of affected hues.",
"This procedures allows the hue, lightness, and saturation in the specified drawable to be modified. The 'hue-range' parameter provides the capability to limit range of affected hues.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1997",
......
......@@ -1955,7 +1955,7 @@ register_drawable_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-drawable-merge-shadow",
"Merge the shadow buffer with the specified drawable.",
"This procedure combines the contents of the image's shadow buffer (for temporary processing) with the specified drawable. The \"undo\" parameter specifies whether to add an undo step for the operation. Requesting no undo is useful for such applications as 'auto-apply'.",
"This procedure combines the contents of the image's shadow buffer (for temporary processing) with the specified drawable. The 'undo' parameter specifies whether to add an undo step for the operation. Requesting no undo is useful for such applications as 'auto-apply'.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......@@ -2148,7 +2148,7 @@ register_drawable_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-drawable-offset",
"Offset the drawable by the specified amounts in the X and Y directions",
"This procedure offsets the specified drawable by the amounts specified by 'offset_x' and 'offset_y'. If 'wrap_around' is set to TRUE, then portions of the drawable which are offset out of bounds are wrapped around. Alternatively, the undefined regions of the drawable can be filled with transparency or the background color, as specified by the 'fill_type' parameter.",
"This procedure offsets the specified drawable by the amounts specified by 'offset_x' and 'offset_y'. If 'wrap_around' is set to TRUE, then portions of the drawable which are offset out of bounds are wrapped around. Alternatively, the undefined regions of the drawable can be filled with transparency or the background color, as specified by the 'fill-type' parameter.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1997",
......
......@@ -3540,7 +3540,7 @@ register_image_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-image-get-colormap",
"Returns the image's colormap",
"This procedure returns an actual pointer to the image's colormap, as well as the number of bytes contained in the colormap. The actual number of colors in the transmitted colormap will be \"num_bytes\" / 3. If the image is not in Indexed color mode, no colormap is returned.",
"This procedure returns an actual pointer to the image's colormap, as well as the number of bytes contained in the colormap. The actual number of colors in the transmitted colormap will be 'num-bytes' / 3. If the image is not in Indexed color mode, no colormap is returned.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......@@ -3573,7 +3573,7 @@ register_image_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-image-set-colormap",
"Sets the entries in the image's colormap.",
"This procedure sets the entries in the specified image's colormap. The number of entries is specified by the \"num_bytes\" parameter and corresponds to the number of INT8 triples that must be contained in the \"colormap\" array. The actual number of colors in the transmitted colormap is \"num_bytes\" / 3.",
"This procedure sets the entries in the specified image's colormap. The number of entries is specified by the 'num-bytes' parameter and corresponds to the number of INT8 triples that must be contained in the 'colormap' array. The actual number of colors in the transmitted colormap is 'num-bytes' / 3.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......
......@@ -995,7 +995,7 @@ register_layer_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-layer-scale",
"Scale the layer to the specified extents.",
"This procedure scales the layer so that its new width and height are equal to the supplied parameters. The \"local_origin\" parameter specifies whether to scale from the center of the layer, or from the image origin. This operation only works if the layer has been added to an image.",
"This procedure scales the layer so that its new width and height are equal to the supplied parameters. The 'local-origin' parameter specifies whether to scale from the center of the layer, or from the image origin. This operation only works if the layer has been added to an image.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......
......@@ -1306,7 +1306,7 @@ register_paint_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-paintbrush",
"Paint in the current brush with optional fade out parameter and pull colors from a gradient.",
"This tool is the standard paintbrush. It draws linearly interpolated lines through the specified stroke coordinates. It operates on the specified drawable in the foreground color with the active brush. The \"fade_out\" parameter is measured in pixels and allows the brush stroke to linearly fall off. The pressure is set to the maximum at the beginning of the stroke. As the distance of the stroke nears the fade_out value, the pressure will approach zero. The gradient_length is the distance to spread the gradient over. It is measured in pixels. If the gradient_length is 0, no gradient is used.",
"This tool is the standard paintbrush. It draws linearly interpolated lines through the specified stroke coordinates. It operates on the specified drawable in the foreground color with the active brush. The 'fade-out' parameter is measured in pixels and allows the brush stroke to linearly fall off. The pressure is set to the maximum at the beginning of the stroke. As the distance of the stroke nears the fade-out value, the pressure will approach zero. The gradient-length is the distance to spread the gradient over. It is measured in pixels. If the gradient-length is 0, no gradient is used.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......@@ -1358,7 +1358,7 @@ register_paint_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-paintbrush-default",
"Paint in the current brush. The fade out parameter and pull colors from a gradient parameter are set from the paintbrush options dialog. If this dialog has not been activated then the dialog defaults will be used.",
"This tool is similar to the standard paintbrush. It draws linearly interpolated lines through the specified stroke coordinates. It operates on the specified drawable in the foreground color with the active brush. The \"fade_out\" parameter is measured in pixels and allows the brush stroke to linearly fall off (value obtained from the option dialog). The pressure is set to the maximum at the beginning of the stroke. As the distance of the stroke nears the fade_out value, the pressure will approach zero. The gradient_length (value obtained from the option dialog) is the distance to spread the gradient over. It is measured in pixels. If the gradient_length is 0, no gradient is used.",
"This tool is similar to the standard paintbrush. It draws linearly interpolated lines through the specified stroke coordinates. It operates on the specified drawable in the foreground color with the active brush. The 'fade-out' parameter is measured in pixels and allows the brush stroke to linearly fall off (value obtained from the option dialog). The pressure is set to the maximum at the beginning of the stroke. As the distance of the stroke nears the fade-out value, the pressure will approach zero. The gradient-length (value obtained from the option dialog) is the distance to spread the gradient over. It is measured in pixels. If the gradient-length is 0, no gradient is used.",
"Andy Thomas",
"Andy Thomas",
"1999",
......
......@@ -373,7 +373,7 @@ register_selection_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-by-color-select",
"Create a selection by selecting all pixels (in the specified drawable) with the same (or similar) color to that specified.",
"This tool creates a selection over the specified image. A by-color selection is determined by the supplied color under the constraints of the specified threshold. Essentially, all pixels (in the drawable) that have color sufficiently close to the specified color (as determined by the threshold value) are included in the selection. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar. Feathering can be enabled optionally and is controlled with the \"feather_radius\" parameter. If the sample_merged parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored.",
"This tool creates a selection over the specified image. A by-color selection is determined by the supplied color under the constraints of the specified threshold. Essentially, all pixels (in the drawable) that have color sufficiently close to the specified color (as determined by the threshold value) are included in the selection. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar. Feathering can be enabled optionally and is controlled with the 'feather-radius' parameter. If the 'sample-merged' parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
"1995-1996",
......@@ -439,7 +439,7 @@ register_selection_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-by-color-select-full",
"Create a selection by selecting all pixels (in the specified drawable) with the same (or similar) color to that specified.",
"This tool creates a selection over the specified image. A by-color selection is determined by the supplied color under the constraints of the specified threshold. Essentially, all pixels (in the drawable) that have color sufficiently close to the specified color (as determined by the threshold value) are included in the selection. To select transparent regions, the color specified must also have minimum alpha. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar. Feathering can be enabled optionally and is controlled with the \"feather_radius\" parameter. If the sample_merged parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored.",
"This tool creates a selection over the specified image. A by-color selection is determined by the supplied color under the constraints of the specified threshold. Essentially, all pixels (in the drawable) that have color sufficiently close to the specified color (as determined by the threshold value) are included in the selection. To select transparent regions, the color specified must also have minimum alpha. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar. Feathering can be enabled optionally and is controlled with the 'feather-radius' parameter. If the 'sample-merged' parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored.",
"David Gowers",
"David Gowers",
"2006",
......@@ -647,7 +647,7 @@ register_selection_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-fuzzy-select",
"Create a fuzzy selection starting at the specified coordinates on the specified drawable.",
"This tool creates a fuzzy selection over the specified image. A fuzzy selection is determined by a seed fill under the constraints of the specified threshold. Essentially, the color at the specified coordinates (in the drawable) is measured and the selection expands outwards from that point to any adjacent pixels which are not significantly different (as determined by the threshold value). This process continues until no more expansion is possible. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar at pixels along the seed fill boundary. Feathering can be enabled optionally and is controlled with the \"feather_radius\" paramter. If the sample_merged parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored. If"
"This tool creates a fuzzy selection over the specified image. A fuzzy selection is determined by a seed fill under the constraints of the specified threshold. Essentially, the color at the specified coordinates (in the drawable) is measured and the selection expands outwards from that point to any adjacent pixels which are not significantly different (as determined by the threshold value). This process continues until no more expansion is possible. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar at pixels along the seed fill boundary. Feathering can be enabled optionally and is controlled with the 'feather-radius' paramter. If the 'sample-merged' parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored. If"
"the sample is merged, the specified coordinates are relative to the image origin; otherwise, they are relative to the drawable's origin.",
"Spencer Kimball & Peter Mattis",
"Spencer Kimball & Peter Mattis",
......@@ -719,7 +719,7 @@ register_selection_tools_procs (GimpPDB *pdb)
gimp_procedure_set_static_strings (procedure,
"gimp-fuzzy-select-full",
"Create a fuzzy selection starting at the specified coordinates on the specified drawable.",
"This tool creates a fuzzy selection over the specified image. A fuzzy selection is determined by a seed fill under the constraints of the specified threshold. Essentially, the color at the specified coordinates (in the drawable) is measured and the selection expands outwards from that point to any adjacent pixels which are not significantly different (as determined by the threshold value). This process continues until no more expansion is possible. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar at pixels along the seed fill boundary. Feathering can be enabled optionally and is controlled with the \"feather_radius\" paramter. If the sample_merged parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored. If"
"This tool creates a fuzzy selection over the specified image. A fuzzy selection is determined by a seed fill under the constraints of the specified threshold. Essentially, the color at the specified coordinates (in the drawable) is measured and the selection expands outwards from that point to any adjacent pixels which are not significantly different (as determined by the threshold value). This process continues until no more expansion is possible. The antialiasing parameter allows the final selection mask to contain intermediate values based on close misses to the threshold bar at pixels along the seed fill boundary. Feathering can be enabled optionally and is controlled with the 'feather-radius' paramter. If the 'sample-merged' parameter is TRUE, the data of the composite image will be used instead of that for the specified drawable. This is equivalent to sampling for colors after merging all visible layers. In the case of a merged sampling, the supplied drawable is ignored. If"
"the sample is merged, the specified coordinates are relative to the image origin; otherwise, they are relative to the drawable's origin.",
"David Gowers",
"David Gowers",
......
......@@ -456,7 +456,7 @@ gimp_curves_explicit (gint32 drawable_ID,
* positive values increase the amount of the latter. Color balance can
* be controlled with the 'transfer_mode' setting, which allows
* shadows, midtones, and highlights in an image to be affected
* differently. The 'preserve_lum' parameter, if TRUE, ensures that the
* differently. The 'preserve-lum' parameter, if TRUE, ensures that the
* luminosity of each pixel remains fixed.
*
* Returns: TRUE on success.
......@@ -624,7 +624,7 @@ gimp_histogram (gint32 drawable_ID,
* Modify hue, lightness, and saturation in the specified drawable.
*
* This procedures allows the hue, lightness, and saturation in the
* specified drawable to be modified. The 'hue_range' parameter
* specified drawable to be modified. The 'hue-range' parameter
* provides the capability to limit range of affected hues.
*
* Returns: TRUE on success.
......
......@@ -903,7 +903,7 @@ gimp_drawable_mask_intersect (gint32 drawable_ID,
* Merge the shadow buffer with the specified drawable.
*
* This procedure combines the contents of the image's shadow buffer
* (for temporary processing) with the specified drawable. The \"undo\"
* (for temporary processing) with the specified drawable. The 'undo'
* parameter specifies whether to add an undo step for the operation.
* Requesting no undo is useful for such applications as 'auto-apply'.
*
......@@ -1124,7 +1124,7 @@ gimp_drawable_fill (gint32 drawable_ID,
* TRUE, then portions of the drawable which are offset out of bounds
* are wrapped around. Alternatively, the undefined regions of the
* drawable can be filled with transparency or the background color, as
* specified by the 'fill_type' parameter.
* specified by the 'fill-type' parameter.
*
* Returns: TRUE on success.
*/
......
......@@ -1576,7 +1576,7 @@ gimp_image_merge_down (gint32 image_ID,
*
* This procedure returns an actual pointer to the image's colormap, as
* well as the number of bytes contained in the colormap. The actual
* number of colors in the transmitted colormap will be \"num_bytes\" /
* number of colors in the transmitted colormap will be 'num-bytes' /
* 3. If the image is not in Indexed color mode, no colormap is
* returned.
*
......@@ -1620,10 +1620,10 @@ _gimp_image_get_colormap (gint32 image_ID,
* Sets the entries in the image's colormap.
*
* This procedure sets the entries in the specified image's colormap.
* The number of entries is specified by the \"num_bytes\" parameter
* and corresponds to the number of INT8 triples that must be contained
* in the \"colormap\" array. The actual number of colors in the
* transmitted colormap is \"num_bytes\" / 3.
* The number of entries is specified by the 'num-bytes' parameter and
* corresponds to the number of INT8 triples that must be contained in
* the 'colormap' array. The actual number of colors in the transmitted
* colormap is 'num-bytes' / 3.
*
* Returns: TRUE on success.
*/
......
......@@ -197,7 +197,7 @@ gimp_layer_add_alpha (gint32 layer_ID)
* Scale the layer to the specified extents.
*
* This procedure scales the layer so that its new width and height are
* equal to the supplied parameters. The \"local_origin\" parameter
* equal to the supplied parameters. The 'local-origin' parameter
* specifies whether to scale from the center of the layer, or from the
* image origin. This operation only works if the layer has been added
* to an image.
......
......@@ -561,13 +561,12 @@ gimp_heal_default (gint32 drawable_ID,
* This tool is the standard paintbrush. It draws linearly interpolated
* lines through the specified stroke coordinates. It operates on the
* specified drawable in the foreground color with the active brush.
* The \"fade_out\" parameter is measured in pixels and allows the
* brush stroke to linearly fall off. The pressure is set to the
* maximum at the beginning of the stroke. As the distance of the
* stroke nears the fade_out value, the pressure will approach zero.
* The gradient_length is the distance to spread the gradient over. It
* is measured in pixels. If the gradient_length is 0, no gradient is
* used.
* The 'fade-out' parameter is measured in pixels and allows the brush
* stroke to linearly fall off. The pressure is set to the maximum at
* the beginning of the stroke. As the distance of the stroke nears the
* fade-out value, the pressure will approach zero. The gradient-length
* is the distance to spread the gradient over. It is measured in
* pixels. If the gradient-length is 0, no gradient is used.
*
* Returns: TRUE on success.
*/
......@@ -614,13 +613,13 @@ gimp_paintbrush (gint32 drawable_ID,
* This tool is similar to the standard paintbrush. It draws linearly
* interpolated lines through the specified stroke coordinates. It
* operates on the specified drawable in the foreground color with the
* active brush. The \"fade_out\" parameter is measured in pixels and
* active brush. The 'fade-out' parameter is measured in pixels and
* allows the brush stroke to linearly fall off (value obtained from
* the option dialog). The pressure is set to the maximum at the
* beginning of the stroke. As the distance of the stroke nears the
* fade_out value, the pressure will approach zero. The gradient_length
* fade-out value, the pressure will approach zero. The gradient-length
* (value obtained from the option dialog) is the distance to spread
* the gradient over. It is measured in pixels. If the gradient_length
* the gradient over. It is measured in pixels. If the gradient-length
* is 0, no gradient is used.
*
* Returns: TRUE on success.
......
......@@ -47,8 +47,8 @@
* selection. The antialiasing parameter allows the final selection
* mask to contain intermediate values based on close misses to the
* threshold bar. Feathering can be enabled optionally and is
* controlled with the \"feather_radius\" parameter. If the
* sample_merged parameter is TRUE, the data of the composite image
* controlled with the 'feather-radius' parameter. If the
* 'sample-merged' parameter is TRUE, the data of the composite image
* will be used instead of that for the specified drawable. This is
* equivalent to sampling for colors after merging all visible layers.
* In the case of a merged sampling, the supplied drawable is ignored.
......@@ -113,8 +113,8 @@ gimp_by_color_select (gint32 drawable_ID,
* also have minimum alpha. The antialiasing parameter allows the final
* selection mask to contain intermediate values based on close misses
* to the threshold bar. Feathering can be enabled optionally and is
* controlled with the \"feather_radius\" parameter. If the
* sample_merged parameter is TRUE, the data of the composite image
* controlled with the 'feather-radius' parameter. If the
* 'sample-merged' parameter is TRUE, the data of the composite image
* will be used instead of that for the specified drawable. This is
* equivalent to sampling for colors after merging all visible layers.
* In the case of a merged sampling, the supplied drawable is ignored.
......@@ -303,8 +303,8 @@ gimp_free_select (gint32 image_ID,
* antialiasing parameter allows the final selection mask to contain
* intermediate values based on close misses to the threshold bar at
* pixels along the seed fill boundary. Feathering can be enabled
* optionally and is controlled with the \"feather_radius\" paramter.
* If the sample_merged parameter is TRUE, the data of the composite
* optionally and is controlled with the 'feather-radius' paramter. If
* the 'sample-merged' parameter is TRUE, the data of the composite
* image will be used instead of that for the specified drawable. This
* is equivalent to sampling for colors after merging all visible
* layers. In the case of a merged sampling, the supplied drawable is
......@@ -376,8 +376,8 @@ gimp_fuzzy_select (gint32 drawable_ID,
* antialiasing parameter allows the final selection mask to contain
* intermediate values based on close misses to the threshold bar at
* pixels along the seed fill boundary. Feathering can be enabled
* optionally and is controlled with the \"feather_radius\" paramter.
* If the sample_merged parameter is TRUE, the data of the composite
* optionally and is controlled with the 'feather-radius' paramter. If
* the 'sample-merged' parameter is TRUE, the data of the composite
* image will be used instead of that for the specified drawable. This
* is equivalent to sampling for colors after merging all visible
* layers. In the case of a merged sampling, the supplied drawable is
......
......@@ -587,7 +587,7 @@ can be modified: cyan-red, magenta-green, and yellow-blue. Negative values
increase the amount of the former, positive values increase the amount of the
latter. Color balance can be controlled with the 'transfer_mode' setting, which
allows shadows, midtones, and highlights in an image to be affected
differently. The 'preserve_lum' parameter, if TRUE, ensures that the
differently. The 'preserve-lum' parameter, if TRUE, ensures that the
luminosity of each pixel remains fixed.
HELP
......@@ -809,7 +809,7 @@ BLURB
$help = <<'HELP';
This procedures allows the hue, lightness, and saturation in the specified
drawable to be modified. The 'hue_range' parameter provides the capability to
drawable to be modified. The 'hue-range' parameter provides the capability to
limit range of affected hues.
HELP
......
......@@ -22,10 +22,9 @@ sub drawable_merge_shadow {
$help = <<'HELP';
This procedure combines the contents of the image's shadow buffer (for
temporary processing) with the specified drawable. The "undo"
parameter specifies whether to add an undo step for the
operation. Requesting no undo is useful for such applications as
'auto-apply'.
temporary processing) with the specified drawable. The 'undo'
parameter specifies whether to add an undo step for the operation.
Requesting no undo is useful for such applications as 'auto-apply'.
HELP
&std_pdb_misc;
......@@ -1141,7 +1140,7 @@ This procedure offsets the specified drawable by the amounts specified by
'offset_x' and 'offset_y'. If 'wrap_around' is set to TRUE, then portions of
the drawable which are offset out of bounds are wrapped around. Alternatively,
the undefined regions of the drawable can be filled with transparency or the
background color, as specified by the 'fill_type' parameter.
background color, as specified by the 'fill-type' parameter.
HELP
&std_pdb_misc;
......
......@@ -1331,7 +1331,7 @@ sub image_get_colormap {
$help = <<'HELP';
This procedure returns an actual pointer to the image's colormap, as well as
the number of bytes contained in the colormap. The actual number of colors in
the transmitted colormap will be "num_bytes" / 3. If the image is not in
the transmitted colormap will be 'num-bytes' / 3. If the image is not in
Indexed color mode, no colormap is returned.
HELP
......@@ -1365,9 +1365,9 @@ sub image_set_colormap {
$help = <<'HELP';
This procedure sets the entries in the specified image's colormap. The number
of entries is specified by the "num_bytes" parameter and corresponds to the
number of INT8 triples that must be contained in the "colormap" array. The
actual number of colors in the transmitted colormap is "num_bytes" / 3.
of entries is specified by the 'num-bytes' parameter and corresponds to the
number of INT8 triples that must be contained in the 'colormap' array. The
actual number of colors in the transmitted colormap is 'num-bytes' / 3.
HELP
&std_pdb_misc;
......
......@@ -223,7 +223,7 @@ sub layer_scale {
$help = <<'HELP';
This procedure scales the layer so that its new width and height are
equal to the supplied parameters. The "local_origin" parameter
equal to the supplied parameters. The 'local-origin' parameter
specifies whether to scale from the center of the layer, or from the
image origin. This operation only works if the layer has been added to
an image.
......
......@@ -561,12 +561,12 @@ BLURB
$help = <<'HELP';
This tool is the standard paintbrush. It draws linearly interpolated lines
through the specified stroke coordinates. It operates on the specified drawable
in the foreground color with the active brush. The "fade_out" parameter is
in the foreground color with the active brush. The 'fade-out' parameter is
measured in pixels and allows the brush stroke to linearly fall off. The
pressure is set to the maximum at the beginning of the stroke. As the distance
of the stroke nears the fade_out value, the pressure will approach zero. The
gradient_length is the distance to spread the gradient over. It is measured in
pixels. If the gradient_length is 0, no gradient is used.
of the stroke nears the fade-out value, the pressure will approach zero. The
gradient-length is the distance to spread the gradient over. It is measured in
pixels. If the gradient-length is 0, no gradient is used.
HELP
&std_pdb_misc;
......@@ -623,14 +623,14 @@ BLURB
$help = <<'HELP';
This tool is similar to the standard paintbrush. It draws linearly interpolated lines
through the specified stroke coordinates. It operates on the specified drawable
in the foreground color with the active brush. The "fade_out" parameter is
in the foreground color with the active brush. The 'fade-out' parameter is
measured in pixels and allows the brush stroke to linearly fall
off (value obtained from the option dialog). The pressure is set
to the maximum at the beginning of the stroke. As the distance
of the stroke nears the fade_out value, the pressure will approach zero. The
gradient_length (value obtained from the option dialog) is the
of the stroke nears the fade-out value, the pressure will approach zero. The
gradient-length (value obtained from the option dialog) is the
distance to spread the gradient over. It is measured in pixels. If
the gradient_length is 0, no gradient is used.
the gradient-length is 0, no gradient is used.
HELP
&andy_pdb_misc('1999');
......
......@@ -31,7 +31,7 @@ sufficiently close to the specified color (as determined by the threshold
value) are included in the selection. The antialiasing parameter allows the
final selection mask to contain intermediate values based on close misses to
the threshold bar. Feathering can be enabled optionally and is controlled with
the "feather_radius" parameter. If the sample_merged parameter is TRUE,
the 'feather-radius' parameter. If the 'sample-merged' parameter is TRUE,
the data of the composite image will be used instead of that for the specified
drawable. This is equivalent to sampling for colors after merging all visible
layers. In the case of a merged sampling, the supplied drawable is ignored.
......@@ -95,7 +95,7 @@ value) are included in the selection. To select transparent regions, the color
specified must also have minimum alpha. The antialiasing parameter allows the
final selection mask to contain intermediate values based on close misses to
the threshold bar. Feathering can be enabled optionally and is controlled with
the "feather_radius" parameter. If the sample_merged parameter is TRUE, the data
the 'feather-radius' parameter. If the 'sample-merged' parameter is TRUE, the data
of the composite image will be used instead of that for the specified drawable.
This is equivalent to sampling for colors after merging all visible layers.
In the case of a merged sampling, the supplied drawable is ignored.
......@@ -276,7 +276,7 @@ value). This process continues until no more expansion is possible. The
antialiasing parameter allows the final selection mask to contain intermediate
values based on close misses to the threshold bar at pixels along the seed fill
boundary. Feathering can be enabled optionally and is controlled with the
"feather_radius" paramter. If the sample_merged parameter is TRUE, the data
'feather-radius' paramter. If the 'sample-merged' parameter is TRUE, the data
of the composite image will be used instead of that for the specified drawable.
This is equivalent to sampling for colors after merging all visible layers. In
the case of a merged sampling, the supplied drawable is ignored. If the sample
......@@ -352,7 +352,7 @@ value). This process continues until no more expansion is possible. The
antialiasing parameter allows the final selection mask to contain intermediate
values based on close misses to the threshold bar at pixels along the seed fill
boundary. Feathering can be enabled optionally and is controlled with the
"feather_radius" paramter. If the sample_merged parameter is TRUE, the data
'feather-radius' paramter. If the 'sample-merged' parameter is TRUE, the data
of the composite image will be used instead of that for the specified drawable.
This is equivalent to sampling for colors after merging all visible layers. In
the case of a merged sampling, the supplied drawable is ignored. If the sample
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment