Commit 0080b4e0 authored by Manish Singh's avatar Manish Singh

libtool 1.3 upgrade

* Makefile.am: don't install gimprc.5 in our sharedir

-Yosh
parent 0d9875c1
Sat May 1 12:14:54 PDT 1999 Manish Singh <yosh@gimp.org>
* acinclude.m4
* config.guess
* config.sub
* ltconfig
* ltmain.sh: upgrade to libtool 1.3
* Makefile.am: don't install gimprc.5 in our sharedir
Sat May 1 11:05:02 1999 ape@lrdpf.spacetec.no (Asbjorn Pettersen)
* plug-ins/print/print.c (get_printers): OS/2 printing.
......@@ -1582,7 +1592,7 @@ Fri Mar 19 20:24:20 PST 1999 Manish Singh <yosh@gimp.org>
* ltconfig
* ltmain.sh: upgrade to libtool 1.2f
* autogen.sh: libtool is not required to autogen gtk+
* autogen.sh: libtool is not required to autogen gimp
* acconfig.h: remove WITH_SYMBOL_UNDERSCORE (not explictly
needed)
......
......@@ -55,7 +55,6 @@ EXTRA_DIST = \
gimpdata_DATA = \
gimprc \
gimprc_user \
gimprc.5 \
gtkrc \
unitrc \
gimp_logo.ppm \
......
## libtool.m4 - Configure libtool for the target system. -*-Shell-script-*-
## Copyright (C) 1996-1999 Free Software Foundation, Inc.
## Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
## Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
......@@ -21,7 +21,7 @@
## configuration script generated by Autoconf, you may include it under
## the same distribution terms that you use for the rest of that program.
# serial 35 AC_PROG_LIBTOOL
# serial 39 AC_PROG_LIBTOOL
AC_DEFUN(AC_PROG_LIBTOOL,
[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
......@@ -30,8 +30,9 @@ AC_CACHE_SAVE
# Actually configure libtool. ac_aux_dir is where install-sh is found.
CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
LD="$LD" NM="$NM" RANLIB="$RANLIB" LN_S="$LN_S" \
DLLTOOL="$DLLTOOL" AS="$AS" \
LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \
DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \
${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \
|| AC_MSG_ERROR([libtool configure failed])
......@@ -62,8 +63,6 @@ AC_REQUIRE([AC_PROG_RANLIB])dnl
AC_REQUIRE([AC_PROG_CC])dnl
AC_REQUIRE([AC_PROG_LD])dnl
AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_SYS_NM_PARSE])dnl
AC_REQUIRE([AC_SYS_SYMBOL_UNDERSCORE])dnl
AC_REQUIRE([AC_PROG_LN_S])dnl
dnl
......@@ -72,10 +71,16 @@ libtool_flags="--cache-file=$cache_file"
test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
test "$lt_dlopen" = yes && libtool_flags="$libtool_flags --enable-dlopen"
test "$silent" = yes && libtool_flags="$libtool_flags --silent"
test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
[libtool_flags="$libtool_flags --enable-dlopen"])
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[libtool_flags="$libtool_flags --enable-win32-dll"])
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock avoid locking (might break parallel builds)])
test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
# Some flags need to be propagated to the compiler or linker for good
# libtool support.
......@@ -111,33 +116,28 @@ case "$host" in
fi
;;
*-*-cygwin*)
AC_SYS_LIBTOOL_CYGWIN
ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
[*-*-cygwin* | *-*-mingw*)
AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
AC_CHECK_TOOL(OBJDUMP, objdump, false)
;;
])
esac
# enable the --disable-libtool-lock switch
AC_ARG_ENABLE(libtool-lock,
[ --disable-libtool-lock force libtool not to do file locking],
need_locks=$enableval,
need_locks=yes)
if test x"$need_locks" = xno; then
libtool_flags="$libtool_flags --disable-lock"
fi
])
# AC_LIBTOOL_DLOPEN - check for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [lt_dlopen=yes])
# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
# AC_ENABLE_SHARED - implement the --enable-shared flag
# Usage: AC_ENABLE_SHARED[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_SHARED,
[define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_DEFUN(AC_ENABLE_SHARED, [dnl
define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(shared,
changequote(<<, >>)dnl
<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
......@@ -162,15 +162,15 @@ enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
])
# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
AC_DEFUN(AC_DISABLE_SHARED,
[AC_ENABLE_SHARED(no)])
AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_SHARED(no)])
# AC_ENABLE_STATIC - implement the --enable-static flag
# Usage: AC_ENABLE_STATIC[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_STATIC,
[define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_DEFUN(AC_ENABLE_STATIC, [dnl
define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(static,
changequote(<<, >>)dnl
<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
......@@ -195,16 +195,16 @@ enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
])
# AC_DISABLE_STATIC - set the default static flag to --disable-static
AC_DEFUN(AC_DISABLE_STATIC,
[AC_ENABLE_STATIC(no)])
AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_STATIC(no)])
# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
# `yes'.
AC_DEFUN(AC_ENABLE_FAST_INSTALL,
[define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
AC_ARG_ENABLE(fast-install,
changequote(<<, >>)dnl
<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
......@@ -229,9 +229,8 @@ enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
])
# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install
AC_DEFUN(AC_DISABLE_FAST_INSTALL,
[AC_ENABLE_FAST_INSTALL(no)])
AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_ENABLE_FAST_INSTALL(no)])
# AC_PROG_LD - find the path to the GNU or non-GNU linker
AC_DEFUN(AC_PROG_LD,
......@@ -249,7 +248,7 @@ if test "$ac_cv_prog_gcc" = yes; then
case "$ac_prog" in
# Accept absolute paths.
changequote(,)dnl
/* | [A-Za-z]:[\\/]*)
[\\/]* | [A-Za-z]:[\\/]*)
re_direlt='/[^/][^/]*/\.\./'
changequote([,])dnl
# Canonicalize the path of ld
......@@ -275,10 +274,10 @@ else
fi
AC_CACHE_VAL(ac_cv_path_LD,
[if test -z "$LD"; then
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH; do
test -z "$ac_dir" && ac_dir=.
if test -f "$ac_dir/$ac_prog"; then
if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
ac_cv_path_LD="$ac_dir/$ac_prog"
# Check to see if the program is GNU ld. I'd rather use --version,
# but apparently some GNU ld's only accept -v.
......@@ -323,10 +322,10 @@ AC_CACHE_VAL(ac_cv_path_NM,
# Let the user override the test.
ac_cv_path_NM="$NM"
else
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:"
IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
test -z "$ac_dir" && ac_dir=.
if test -f $ac_dir/nm; then
if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then
# Check to see if the nm accepts a BSD-compat flag.
# Adding the `sed 1q' prevents false positives on HP-UX, which says:
# nm: unknown option "B" ignored
......@@ -350,227 +349,22 @@ AC_MSG_RESULT([$NM])
AC_SUBST(NM)
])
# AC_SYS_NM_PARSE - Check for command to grab the raw symbol name followed
# by C symbol name from nm.
AC_DEFUN(AC_SYS_NM_PARSE,
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM,
[AC_REQUIRE([AC_CANONICAL_HOST])dnl
AC_REQUIRE([AC_PROG_NM])dnl
# Check for command to grab the raw symbol name followed by C symbol from nm.
AC_MSG_CHECKING([command to parse $NM output])
AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
[# These are sane defaults that work on at least a few old systems.
# {They come from Ultrix. What could be older than Ultrix?!! ;)}
changequote(,)dnl
# Character class describing NM global symbol codes.
ac_symcode='[BCDEGRST]'
# Regexp to match symbols that can be accessed directly from C.
ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
# Transform the above into a raw symbol and a C symbol.
ac_symxfrm='\1 \2\3 \3'
# Transform an extracted symbol line into a proper C declaration
ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
# Define system-specific variables.
case "$host_os" in
aix*)
ac_symcode='[BCDT]'
;;
cygwin* | mingw*)
ac_symcode='[ABCDGISTW]'
;;
hpux*)
ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
LIBM=
case "$host" in
*-*-beos* | *-*-cygwin*)
# These system don't have libm
;;
irix*)
ac_symcode='[BCDEGRST]'
*-ncr-sysv4.3*)
AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
;;
solaris*)
ac_symcode='[BDT]'
*)
AC_CHECK_LIB(m, main, LIBM="-lm")
;;
esac
# If we're using GNU nm, then use its standard symbol codes.
if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
ac_symcode='[ABCDGISTW]'
fi
changequote([,])dnl
# Try without a prefix undercore, then with it.
for ac_symprfx in "" "_"; do
ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
# Check to see that the pipe works correctly.
ac_pipe_works=no
rm -f conftest.$ac_ext
cat > conftest.$ac_ext <<EOF
#ifdef __cplusplus
extern "C" {
#endif
char nm_test_var;
void nm_test_func(){}
#ifdef __cplusplus
}
#endif
int main(){nm_test_var='a';nm_test_func;return 0;}
EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
ac_nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
# Try sorting and uniquifying the output.
if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
mv -f "$ac_nlist"T "$ac_nlist"
else
rm -f "$ac_nlist"T
fi
# Make sure that we snagged all the symbols we need.
if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
cat <<EOF > conftest.c
#ifdef __cplusplus
extern "C" {
#endif
EOF
# Now generate the symbol file.
eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
cat <<EOF >> conftest.c
#if defined (__STDC__) && __STDC__
# define lt_ptr_t void *
#else
# define lt_ptr_t char *
# define const
#endif
/* The mapping between symbol names and symbols. */
const struct {
const char *name;
lt_ptr_t address;
}
changequote(,)dnl
lt_preloaded_symbols[] =
changequote([,])dnl
{
EOF
sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
cat <<\EOF >> conftest.c
{0, (lt_ptr_t) 0}
};
#ifdef __cplusplus
}
#endif
EOF
# Now try linking the two files.
mv conftest.$ac_objext conftestm.$ac_objext
ac_save_LIBS="$LIBS"
ac_save_CFLAGS="$CFLAGS"
LIBS="conftestm.$ac_objext"
CFLAGS="$CFLAGS$no_builtin_flag"
if AC_TRY_EVAL(ac_link) && test -s conftest; then
ac_pipe_works=yes
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
LIBS="$ac_save_LIBS"
CFLAGS="$ac_save_CFLAGS"
else
echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
fi
else
echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
fi
else
echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
fi
else
echo "$progname: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
rm -rf conftest*
# Do not use the global_symbol_pipe unless it works.
if test "$ac_pipe_works" = yes; then
if test x"$ac_symprfx" = x"_"; then
ac_cv_sys_symbol_underscore=yes
else
ac_cv_sys_symbol_underscore=no
fi
break
else
ac_cv_sys_global_symbol_pipe=
fi
done
])
ac_result=yes
if test -z "$ac_cv_sys_global_symbol_pipe"; then
ac_result=no
fi
AC_MSG_RESULT($ac_result)
])
# AC_SYS_LIBTOOL_CYGWIN - find tools needed on cygwin
AC_DEFUN(AC_SYS_LIBTOOL_CYGWIN,
[AC_CHECK_TOOL(DLLTOOL, dlltool, false)
AC_CHECK_TOOL(AS, as, false)
])
# AC_SYS_SYMBOL_UNDERSCORE - does the compiler prefix global symbols
# with an underscore?
AC_DEFUN(AC_SYS_SYMBOL_UNDERSCORE,
[AC_REQUIRE([AC_PROG_NM])dnl
AC_REQUIRE([AC_SYS_NM_PARSE])dnl
AC_MSG_CHECKING([for _ prefix in compiled symbols])
AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
[ac_cv_sys_symbol_underscore=no
cat > conftest.$ac_ext <<EOF
void nm_test_func(){}
int main(){nm_test_func;return 0;}
EOF
if AC_TRY_EVAL(ac_compile); then
# Now try to grab the symbols.
ac_nlist=conftest.nm
if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
# See whether the symbols have a leading underscore.
if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
ac_cv_sys_symbol_underscore=yes
else
if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
:
else
echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
fi
fi
else
echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
fi
else
echo "configure: failed program was:" >&AC_FD_CC
cat conftest.c >&AC_FD_CC
fi
rm -rf conftest*
])
AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
USE_SYMBOL_UNDERSCORE=${ac_cv_sys_symbol_underscore=no}
AC_SUBST(USE_SYMBOL_UNDERSCORE)dnl
])
# AC_CHECK_LIBM - check for math library
AC_DEFUN(AC_CHECK_LIBM, [
AC_CHECK_LIB(mw, _mwvalidcheckl)
AC_CHECK_LIB(m, cos)
])
# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
......@@ -581,7 +375,7 @@ AC_CHECK_LIB(m, cos)
# '${top_builddir}/' (note the single quotes!) if your package is not
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
case "$enable_ltdl_convenience" in
no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
"") enable_ltdl_convenience=yes
......@@ -599,16 +393,21 @@ AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [
# flat, and, if you're not using automake, define top_builddir as
# appropriate in the Makefiles.
# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [
AC_CHECK_LIB(ltdl, main, LIBLTDL="-lltdl", [
case "$enable_ltdl_install" in
no) AC_MSG_WARN([libltdl not installed, but installation disabled]) ;;
"") enable_ltdl_install=yes
ac_configure_args="$ac_configure_args --enable-ltdl-install" ;;
esac
AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
AC_CHECK_LIB(ltdl, main,
[test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
[if test x"$enable_ltdl_install" = xno; then
AC_MSG_WARN([libltdl not installed, but installation disabled])
else
enable_ltdl_install=yes
fi
])
if test x"$enable_ltdl_install" != x"no"; then
if test x"$enable_ltdl_install" = x"yes"; then
ac_configure_args="$ac_configure_args --enable-ltdl-install"
LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la
else
ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
LIBLTDL="-lltdl"
fi
])
......@@ -620,6 +419,6 @@ AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
AC_DEFUN(AM_SYS_NM_PARSE, [indir([AC_SYS_NM_PARSE])])dnl
AC_DEFUN(AM_SYS_SYMBOL_UNDERSCORE, [indir([AC_SYS_SYMBOL_UNDERSCORE])])dnl
AC_DEFUN(AM_SYS_LIBTOOL_CYGWIN, [indir([AC_SYS_LIBTOOL_CYGWIN])])dnl
dnl This is just to quiet aclocal about the macro not being used
if(a,b,[AC_DISABLE_FAST_INSTALL])dnl
Makefile
Makefile.in
.deps
.libs
gimp
colormap_dialog.c
colormap_dialog.t.h
......
......@@ -36,6 +36,20 @@
# (but try to keep the structure clean).
#
# Use $HOST_CC if defined. $CC may point to a cross-compiler
if test x"$CC_FOR_BUILD" = x; then
if test x"$HOST_CC" != x; then
CC_FOR_BUILD="$HOST_CC"
else
if test x"$CC" != x; then
CC_FOR_BUILD="$CC"
else
CC_FOR_BUILD=cc
fi
fi
fi
# This is needed to find uname on a Pyramid OSx when run in the BSD universe.
# (ghazi@noc.rutgers.edu 8/24/94.)
if (test -f /.attbin/uname) >/dev/null 2>&1 ; then
......@@ -78,7 +92,7 @@ main:
ret \$31,(\$26),1
.end main
EOF
${CC-cc} $dummy.s -o $dummy 2>/dev/null
$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
......@@ -203,6 +217,32 @@ EOF
atari*:OpenBSD:*:*)
echo m68k-unknown-openbsd${UNAME_RELEASE}
exit 0 ;;
# The situation for MiNT is a little confusing. The machine name
# can be virtually everything (everything which is not
# "atarist" or "atariste" at least should have a processor
# > m68000). The system name ranges from "MiNT" over "FreeMiNT"
# to the lowercase version "mint" (or "freemint"). Finally
# the system name "TOS" denotes a system which is actually not
# MiNT. But MiNT is downward compatible to TOS, so this should
# be no problem.
atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
*falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*)
echo m68k-atari-mint${UNAME_RELEASE}
exit 0 ;;
milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*)
echo m68k-milan-mint${UNAME_RELEASE}
exit 0 ;;
hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*)
echo m68k-hades-mint${UNAME_RELEASE}
exit 0 ;;
*:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*)
echo m68k-unknown-mint${UNAME_RELEASE}
exit 0 ;;
sun3*:NetBSD:*:*)
echo m68k-sun-netbsd${UNAME_RELEASE}
exit 0 ;;
......@@ -236,7 +276,7 @@ EOF
VAX*:ULTRIX*:*:*)
echo vax-dec-ultrix${UNAME_RELEASE}
exit 0 ;;
2020:CLIX:*:*)
2020:CLIX:*:* | 2430:CLIX:*:*)
echo clipper-intergraph-clix${UNAME_RELEASE}
exit 0 ;;
mips:*:*:UMIPS | mips:*:*:RISCos)
......@@ -260,7 +300,7 @@ EOF
exit (-1);
}
EOF
${CC-cc} $dummy.c -o $dummy \
$CC_FOR_BUILD $dummy.c -o $dummy \
&& ./$dummy `echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` \
&& rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
......@@ -326,7 +366,7 @@ EOF
exit(0);
}
EOF
${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo rs6000-ibm-aix3.2.5
elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then
......@@ -406,7 +446,7 @@ EOF
exit (0);
}
EOF
(${CC-cc} $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
($CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy`
rm -f $dummy.c $dummy
esac
HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'`
......@@ -438,7 +478,7 @@ EOF
exit (0);
}
EOF
${CC-cc} $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
$CC_FOR_BUILD $dummy.c -o $dummy && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
echo unknown-hitachi-hiuxwe2
exit 0 ;;
......@@ -451,9 +491,6 @@ EOF
*9??*:MPE*:*:*)
echo hppa1.0-hp-mpeix
exit 0 ;;
*9??*:MPE*:*:*)
echo hppa1.0-hp-mpeix
exit 0 ;;
hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* )
echo hppa1.1-hp-osf
exit 0 ;;
......@@ -570,8 +607,9 @@ EOF
esac
# The BFD linker knows what the default object file format is, so
# first see if it will tell us.
ld_help_string=`ld --help 2>&1`
# first see if it will tell us. cd to the root directory to prevent
# problems with other programs or directories called `ld' in the path.
ld_help_string=`cd /; ld --help 2>&1`
ld_supported_emulations=`echo $ld_help_string \
| sed -ne '/supported emulations:/!d
s/[ ][ ]*/ /g
......@@ -606,7 +644,7 @@ EOF
.end main
EOF
LIBC=""
${CC-cc} $dummy.s -o $dummy 2>/dev/null
$CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null
if test "$?" = 0 ; then
./$dummy
case "$?" in
......@@ -651,7 +689,7 @@ EOF
return 0;
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
else
# Either a pre-BFD a.out linker (linux-gnuoldld)
......@@ -694,7 +732,7 @@ EOF
return 0;
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
fi ;;
# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions
......@@ -958,7 +996,7 @@ main ()
}
EOF
${CC-cc} $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
$CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy && rm $dummy.c $dummy && exit 0
rm -f $dummy.c $dummy
# Apollos put the system type in the environment.
......
......@@ -151,12 +151,12 @@ case $basic_machine in
# Some are omitted here because they have special meanings below.
tahoe | i860 | m32r | m68k | m68000 | m88k | ns32k | arc | arm \
| arme[lb] | pyramid | mn10200 | mn10300 | tron | a29k \
| 580 | i960 | h8300 | hppa | hppa1.0 | hppa1.1 | hppa2.0 \
| hppa2.0w \
| alpha | alphaev5 | alphaev56 | we32k | ns16k | clipper \
| i370 | sh | powerpc | powerpcle | 1750a | dsp16xx | pdp11 \
| mips64 | mipsel | mips64el | mips64orion | mips64orionel \
| mipstx39 | mipstx39el \
| 580 | i960 | h8300 \
| hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w \
| alpha | alphaev[4-7] | alphaev56 | alphapca5[67] \
| we32k | ns16k | clipper | i370 | sh | powerpc | powerpcle \
| 1750a | dsp16xx | pdp11 | mips64 | mipsel | mips64el \
| mips64orion | mips64orionel | mipstx39 | mipstx39el \
| sparc | sparclet | sparclite | sparc64 | v850)
basic_machine=$basic_machine-unknown
;;
......@@ -176,10 +176,11 @@ case $basic_machine in
| m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | arm-* | c[123]* \
| mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \
| power-* | none-* | 580-* | cray2-* | h8300-* | i960-* \
| xmp-* | ymp-* | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* \
| hppa2.0w-* \
| alpha-* | alphaev5-* | alphaev56-* | we32k-* | cydra-* \
| ns16k-* | pn-* | np1-* | xps100-* | clipper-* | orion-* \
| xmp-* | ymp-* \
| hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \
| alpha-* | alphaev[4-7]-* | alphaev56-* | alphapca5[67] \
| we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \
| clipper-* | orion-* \
| sparclite-* | pdp11-* | sh-* | powerpc-* | powerpcle-* \
| sparc64-* | mips64-* | mipsel-* \
| mips64el-* | mips64orion-* | mips64orionel-* \
......@@ -630,6 +631,10 @@ case $basic_machine in
xps | xps100)
basic_machine=xps100-honeywell
;;
*mint | *MiNT)
basic_machine=m68k-atari
os=-mint
;;
none)
basic_machine=none-none
os=-none
......@@ -790,6 +795,9 @@ case $os in
-xenix)
os=-xenix
;;
-*mint | -*MiNT)
os=-mint
;;
-none)
;;
*)
......@@ -914,6 +922,9 @@ case $basic_machine in
f301-fujitsu)
os=-uxpv
;;
*-atari*)
os=-mint
;;
*)
os=-none
;;
......@@ -971,6 +982,9 @@ case $basic_machine in
-aux*)
vendor=apple
;;
-*mint | -*MiNT)
vendor=atari
;;
esac
basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"`
;;
......
This diff is collapsed.
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment